---

---

Brunswick Warp Zone (BRUBZON998)

Warp Zone, the second ball in the Zone-Asymmetric series expands on and complements the original Time Zone by using a medium-load particle coverstock over the Time Zone core. The medium-load particle coverstock increases traction in the oil and improves control on dry boards. This complementary ball reaction creates a better match up on heavy oil and over/under lane conditions. Bowlers with faster ball speeds and/or large amounts of axis tilt (low track, spinner release) will benefit from the Warp Zones increased traction in the oil.

When drilling the Warp Zone, placement of the Riser Pin and the PSA locator (relative to the bowler’s axis) influences the amount of track flare created, contributing to the on lane ball reaction. The unique “ellipse” engraving* around the riser pin on the Warp Zone allows the bowler to easily see the orientation of the core and the PSA when looking at their ball, making it easier to identify the choice of layout.

WARNING – Both the Warp Zone & Time Zone have a large amount of asymmetry designed into the core. Do not place the PSA locator pin on the negative side of the ball, you could track over every hole on the ball!

The Warp Zone is finished with a dull 400-grit surface finish which increases its hooking action in the oil. Dull surface finishes can sometimes hook too early resulting in reduced backend reaction and hitting power. To increase length, polish the surface with Brunswick’s Factory Finish High Gloss Polish.

---

Top Weight and Pin Position only valid on 14 thru 16lbs balls

---

Our Price $117.00